MB Glow

MBEPOXY® MB Glow is formulated for an excellent gloss mirror-like ­nish, and it gives mirror-like reective properties to the polished stone.

APPLICATION:

1. Coating and repairing defects in natural granite and marble.
2. Prepared to give mirror-like glass finish.

SHELF LIFE: 12 Months

PACKAGING UNITS:

20 Ltr | 40 Ltr | 240 Ltr

APPLICATION PROCESS:

1. Grind the stone with 400 No. abrasive to stones like marbles and granite.
2. Thoroughly clean the stone. Ensure there is no dust, dirt, oil, moisture, or grease on the stone.
3. Keep the slab under the sunlight for drying or heat it to 40°.c
4. Thoroughly mix resin and hardener in a 3:1 ratio in a disposable bowl.
5. Apply a Thin Coat/Layer of the mixed material by putty knife/spray/paint/brush/roller/ cotton. You can apply as many coasts as required.
6. Allow it to cure in the light for 24hours.
7. After 24 hours of cure, the extra material can be removed will grinding the stone.
8. The stone can grind with your desired number of abrasives.

BENEFITS:

• Provides high gloss.
• Economical.
• Low viscosity results.
• Excellent penetration.
• Non-yellowing.
• Weathering resistant.
• Great for exterior application.
• It gives the mirror-like impress.

TECHNICAL DETAILS:

Mixing Ratio - 3:1 w/w

Mixing Ratio - 3:1 v/v

Viscosity of Part A at 25°C - 20- 25 Cps

Viscosity of Part B at 25°C - 20- 25 Cps

Pot Life at 25°C - 240- 300 Minutes

Tack Free at 25°C - 240- 300 Minutes

Resting Time Before Polishing - 24 Hours

Mixing Viscosity at 25°C - 21- 26 Cps