MB Epoxy Table Top Resin Kit
Description
MB EPOXY
TABLE TOP RESIN KIT (For 8 mm to 9 mm casting)
HIGHLIGHTED
FEATURES:
·
Crystal Clear
·
Super High Gloss
·
Mixing Ratio 3:1
·
Very strong
·
Self Levelling
·
100% Solid, No VOCs
·
Great Air release
·
Suitable for all kinds of
casting up to 10-15 mm
·
Slow cure (24 hours @
room temp.)
·
Heat resistant
PACKAGE
INCLUDES:
1 kg (Resin 750 grams + Hardener 250 grams)
4 Pigments 25 grams each (Ocean theme)
·
MB AQUA MARINE
·
MB NAVY BLUE
·
MB WHITE
·
MB IVORY (All the
pigments are opaque)
DESCRIPTION:
MB EPOXY TABLE TOP RESIN is specially formulated to
give a high gloss in clear casting and leaves a glass-like finish. This product
provides a slow cure and property development at ambient and low temperatures
without accelerators ad allows for a quick return to service.
Approved
Applications:
o Wood
o Casting
o Coffee
table
o Counter
tables
o Coaster
o Tabletops
o Craft
coatings
o
Jewellery making (small casting
or multi-layered)
o Hobbyist
and craft making
o Plaques
and frames
o Pebble
coating
TECHNICAL DETAILS:
DETAIL |
TIME |
TEMPERATURE |
POT LIFE |
60 mins |
@25-30 deg C |
WORK TIME(POST POUR) |
120 mins |
@25-30 deg C |
TOUCH DRY |
10-12 hrs |
@25-30 deg C |
FULL CURE |
24 hrs |
@25-30 deg C |
NOTE: The typical pot-life on this item is roughly 45-60
minutes based on mass and temperature.
The full cure is 24 hours at normal conditions.
MEASURE:
·
Wearing your gloves on,
Pour the desired amount of Part A into a measuring container.
·
Pour Part B into the Part
A container until it’s at the right mark to make it a 3:1 ratio.
·
You can refer to our
resin coverage calculator to determine how much you'll need
·
https://www.mbenterprises.co/calculator
·
PRO TIP - Mix up a little
more than you think you’ll need because you want to completely cover your work
in one shot and not have to mix more later.
MIX:
·
Mix for at least 10-12
minutes in a round motion until the chemical is clear and free of striations
·
Allow the mixed
components to stand in your mixed cup for at least 2-5 minutes.
POUR:
·
Pour along the side of
the container to help alleviate air entrapment.. This allows for bubbles to
rise to the surface.
·
Small castings and
potting units may take longer to cure than larger items.
WAIT:
·
MB EPOXY TABLE TOP RESIN
needs to sit for several hours in a dust-free space while it cures.
·
In about 10-12 hours it
will be touch dry.
·
It will be fully cured
within 24 hours.
NOTE: Cold weather slows the curing process down, whereas
heat speeds curing up