MB Epoxy Table Top Resin (08-10 mm)
Available Options
Description
HIGHLIGHTED
FEATURES:
·
Suitable
for all kinds of casting up to 08-10 mm
·
Crystal
Clear
·
Super
High Gloss
·
Mixing
Ratio 3:1
·
Very
strong
·
Self-Levelling
·
100% Solid,
No VOCs
·
Great Air
release
·
Slow cure
(24 hours @ room temp.)
·
Heat
resistant
PACKAGE
INCLUDES: 1 kg(Resin
750 grams + Hardener 250 grams)
DESCRIPTION:
MB EPOXY
TABLE TOP RESIN is specially formulated to give a high gloss in clear casting
and leaves a glass-like finish. This product provides a slow cure and property
development at ambient and low temperatures without accelerators ad allows for
a quick return to service.
Approved
Applications:
·
Wood
·
Casting
·
Coffee
table
·
Counter
tables
·
Coaster
·
Table
tops
·
Craft
coatings
·
Jewellery making
(small casting or multi-layered)
·
Hobbyist
and craft making
·
Plaques
and frames
·
Pebble
coating
TECHNICAL DETAILS:
DETAIL TIME TEMPERATURE
POT LIFE 60 mins @25-30 deg C
WORK
TIME(POST POUR) 120 mins @25-30 deg C
TOUCH DRY 10-12 hrs @25-30
deg C
FULL CURE 24 hrs @25-30
deg C
NOTE:
The
typical pot-life on this item is roughly 45-60 minutes based on mass and
temperature.
The full
cure is 24 hours at normal conditions.
MEASURE:
Wearing
your gloves on, Pour the desired amount of Part A into a measuring container.
Pour Part
B into the Part A container until it’s at the right mark to make it a 3:1
ratio.
You can
refer to our resin coverage calculator to determine how much you'll need
https://www.mbenterprises.co/calculator
PRO TIP
-
Mix up a
little more than you think you’ll need because you want to completely cover
your work in one shot and not have to mix more later.
MIX:
Mix for
at least 10-12 minutes in a round motion until the chemical is clear and free
of striations
Allow the
mixed components to stand in your mixed cup for at least 2-5 minutes.
POUR:
Pour
along the side of the container to help alleviate air entrapment. This allows
for bubbles to rise to the surface.
Small
castings and potting units may take longer to cure than larger items.
WAIT:
MB EPOXY
TABLE TOP RESIN needs to sit for several hours in a dust-free space while it
cures.
In about
10-12 hours it will be touch dry.
It will
be fully cured within 24 hours.
NOTE:
Cold
weather slows the curing process down, whereas heat speeds curing up